A Do-It-Yourself Endless Pools Installation
Bookmark This Page | Send To A Friend
An Endless Pool installation
in Wasilla, Alaska.
(The following photo story was taken with permission
from http://www.mccullyweb.com/wasilla/)
(Part 1 of 3)
"The crew at Endless Pools deserves a big
round of applause for all of the work and thinking
that went into the design of the Endless Pool.
We did the entire installation ourselves, never
had to call tech support, everything was in the
manual or on the video. Sometimes we had to watch
parts of the video more than once, but the info
was there. GREAT JOB! "
The flat spot in the lower right corner is the
pool location.
|
 |
 |
Me and Aaron grading the pool bottom
for the blueboard insulation, two layers=R-20. |
The flat spot in the lower right
corner is the pool location now formed up for
the slab.
|
 |
 |
Pouring the slab for the pool. It
has to be as level and flat as possible. |
The slab is poured and foundation
walls are going up. |
 |
 |
The completed spot for the Endless Pool. |
Gretchen laying out for the mural. |
 |
|
The mural, we still have to build the columns
and arch in front of the mural. This will give
it the impression of looking out from inside. |
The steel pool frame.
|
 |
1 | 2 | 3 >> Next
